Hub Reset

Factory reset your Hub

  1. On the back of the Hub, press the pinhole reset button for 10 seconds
  2. We recommend using a pin/pen for this
  3. It can take 5 to 10 minutes for the Hub to fully reset
  4. Once the white power light on the front of the Hub is solidly lit you’re good to go

Tip: The Hub will return to its factory settings, so if you’ve made any changes like updating your WiFi password, you’ll need to set these up again after the Hub has reset.

You’ll need to reconnect your devices to the Hub using your WiFi password. This can be found on the bottom of the Hub.
Need help reconnecting?